
Networking and Integration
Carrier i-Vu® Building Automation System
The i-Vu® building automation system provides a 360° view of your building’s entire operation. It’s everything you need to maintain comfort for occupants, optimize energy usage, and resolve problems faster.
The i-Vu system is available from Carrier Controls Experts nationwide. These factory-authorized Controls Experts maintain extensive knowledge of the i-Vu system, providing owners with peace-of-mind that their control system will be properly installed and serviced.
No Results Found

Application: Controls
Description: The BACnet/SC Virtual Hub is a software application that acts as the central director of traffic between all node devices on a BACnet/SC network.

Application: Controls
Description: Network device that prevents noise and signal distortion.

Application: Controls
Description: Network device used to connect ethernet-based local area network (LAN) to the Carrier Comfort Network® (CCN).

Application: Controls
Description: Network device used to integrate Carrier and non-Carrier equipment with i-Vu®.

Application: Controls
Description: Network device used to integrate BACnet® i-Vu® Building Automation System controllers with non-Carrier equipment supporting BACnet, Modbus® and Lonworks® protocols.

Application: Controls
Description: BACnet®/IP routing with a subnetwork of BACnet MS/TP controllers. Increases the capacity of the i-Vu® Building Automation System.

Application: Packaged indoor , Packaged outdoor
Description: The LonWorks® card is used to plug into the Carrier Multi-Protocol Controller allowing Carrier equipment the ability to share up to 62 SNVTs with a LonWorks network.

Application: Controls, VRF
Description: Interface provides the capability to monitor or control a VRF system with multiple zones.

Application: Chillers, Packaged outdoor
Description: Integrated BACnet® communications card

Application: Controls
Description: Network device provides electrical surge protection to controllers.

Application: Controls
Description: Network device used to expand and amplify network signals.

Application: Controls
Description: Network device that integrates with other manufacturers’ equipment into the i-Vu building automation system using the BACnet protocol.

Application: Controls
Description: Network device that routes BACnet messages between the i-Vu building automation system backbone (BACnet/IP), and a subnetwork of i-Vu controllers (BACnet MS/TP and/ or BACnet ARCnet).