Skip to main content

24/7 Commercial Service

call 1-800-379-6484

Find an expert

TruVu™ Controller
TV-MPCXP1628-NR

The Carrier® TruVu™ MPCXP1628 controller provides multi-purpose monitoring and control for a variety of HVAC system applications. Flexible and versatile, it supports multiple I/O configurations for accomplishing both common and custom HVAC control strategies.

The TruVu MPCXP1628 controller features built-in routing and integration capabilities, 44 universal I/O points, and support for up to nine TruVu MPC I/O expansion modules for a total of 224 hardware control points.

The TruVu MPCXP1628-NR controller has the same features as the TruVu MPCXP1628, but does not support BACnet routing.


carrier-bacnet-international-member
carrier-bacnet-testing-laboratories

Application Features

  • Comprehensive library of factory-engineered control programs available for complete air-side and water-side system control
  • Graphically programmable using the Snap programming tool
  • Supports Carrier communicating room sensors, which allow for local setpoint adjustment and local overrides

Hardware Features

  • Gig-E 1000 Mbps Ethernet port supports BACnet/IP, Modbus TCP/IP and DHCP addressing
  • Local access 10/100 Ethernet port for system startup and troubleshooting
  • Real-time clock keeps time in the event of power failure for up to 3 days without batteries
  • Capable of system or stand-alone operation
  • Act Net bus supports up to 16 communicating i-Vu smart valves
  • Can be din-rail or screw mounted
  • Supports up to 9 TruVu MPC I/O expanders

BACnet Features

  • Conforms to the BACnet Building Controller (B-BC), BACnet Router (B-RTR), and BACnet BBMD (B-BBMD), standard device profiles
  • Supports BACnet interoperability and routing with and between BACnet/IP, BACnet MS/TP, and BACnet over ARC156
  • High-speed, BACnet over ARC156 communications delivers information at the speeds necessary for effective data transfer
  • Can serve as a BACnet Broadcast Management Device (BBMD)
  • Supports BACnet Foreign Device Registration (FDR)

System Benefits

  • Fully plug-and-play with the Carrier i-Vu® building automation system
  • Supports demand limiting and optimal start for maximum energy savings
  • Supports up to 1,500 third-party BACnet points and up to 200 Modbus points for system integration
BACnet Support Conforms to the BACnet Building Controller (B-BC), BACnet Router (B-RTR, not applicable to -NR version), and BACnet BBMD (B-BBMD) device profiles as defined in BACnet standard135-2001 Annex L 2012
Communication Ports Gig-E: 10/100/1000 BaseT Ethernet port for BACnet/IP and/or BACnet/Ethernet and/or Modbus Ports TCP/IP communication
S1 ARC/MSTP: High-speed EIA-485 port with End of Net switch for connecting one of the following:
• BACnet ARCnet network at 156 kbps or BACnet MS/TP network at 9600 to 115.2 kbps
• Modbus RTU at 9600 to 115.2 kbps
S2 MSTP: Electrically isolated EIA-485 port with End of Net switch for connecting one of the following:
• BACnet MS/TP network at 9600 to 115.2 kbps
• Modbus RTU at 9600 to 115.2 kbps
Service: 10/100 Base T Ethernet port for system start-up and troubleshooting
IO Bus port: Provides communication for wired TruVu MPC I/O expanders that are powered by external power supplies.
IO Bus edge connector: 6-pin connector that provides communication and power to a directly-connected TruVu MPC I/O expander
Third Party Integration Supports up to 1,500 third-party BACnet points and 200 Modbus points (memory dependent).
Physical Fire-retardant plastic ABS, UL94-5VA
Universal Inputs 16 Bit A/D with 28 channels electronically configured to any of the following input types:
Dry Contact OR Pulse Counting inputs up to 60Hz OR Voltage (0-10 Vdc) OR Current (0-20 mA) OR Thermistor (Precon Type II 10kΩ OR Precon Type III 10kΩ OR Carrier YSI 5kΩ OR S-5700-850 10kΩ w/ 11kΩ shunt) OR RTD (Platinum RTD TS-8000 1kΩ @ 32°F (0.00385 TCR) OR Platinum RTD 1kΩ @ 32°F (0.00375 TCR) OR Nickel-iron RTD 1kΩ @ 70°F, 699 Ω @ -40°F OR Balco (Nickel-iron) TS8000 RTD 1kΩ @ 70°F, 779 Ω @ -40°F)
24VDC auxiliary sensor power: 200mA max. (AC power input) 500 mA max. (DC power input)
Universal Outputs D/A Resolution (analog out) 12 bits; 16 channels configurable to any of the following output types: Voltage (0-10 Vdc) OR Current (0-20 mA) OR Relay contacts, potential free, normally open, rated 24VAC/DC @ 1 Amp (resistive) Hand/Auto/Off override switches for all outputs, Potentiometer for manual adjustment of all analog outputs, Status LED for all outputs
Protection Two fast acting, 5mm x 20mm glass fuses:
• A 2.5A fuse for the TV-MPCXP1628’s power • A 4A fuse for the I/O bus edge connector.
The power and network ports comply with the EMC requirements EN50491-5-2.
Compliance United States of America: FCC compliant to Title CFR47, Chapter 1, Subchapter A, Part 15, Subpart B, Class A; UL listed to UL916, PAZX, Energy Management Equipment
Canada: Industry Canada Compliant, ICES-003, Class A; cUL listed UL 916, PAZX and Energy Management Equipment
Europe: EN50491-5-2:2009; Low Voltage Directive: 2014/35/EU; RoHS Compliant: 2011/65/EU
Australia and New Zealand: C-Tick Mark, AS/NZS 61000-6-3
Real Time Clock Real-time clock keeps track of time in the event of a power failure for up to 3 days.
Environmental Operating Range -40 to 158ºF (-40 to 70ºC) 10 to 95% RH, non-condensing

Application Features

  • Comprehensive library of factory-engineered control programs available for complete air-side and water-side system control
  • Graphically programmable using the Snap programming tool
  • Supports Carrier communicating room sensors, which allow for local setpoint adjustment and local overrides

Hardware Features

  • Gig-E 1000 Mbps Ethernet port supports BACnet/IP, Modbus TCP/IP and DHCP addressing
  • Local access 10/100 Ethernet port for system startup and troubleshooting
  • Real-time clock keeps time in the event of power failure for up to 3 days without batteries
  • Capable of system or stand-alone operation
  • Act Net bus supports up to 16 communicating i-Vu smart valves
  • Can be din-rail or screw mounted
  • Supports up to 9 TruVu MPC I/O expanders

BACnet Features

  • Conforms to the BACnet Building Controller (B-BC), BACnet Router (B-RTR), and BACnet BBMD (B-BBMD), standard device profiles
  • Supports BACnet interoperability and routing with and between BACnet/IP, BACnet MS/TP, and BACnet over ARC156
  • High-speed, BACnet over ARC156 communications delivers information at the speeds necessary for effective data transfer
  • Can serve as a BACnet Broadcast Management Device (BBMD)
  • Supports BACnet Foreign Device Registration (FDR)

System Benefits

  • Fully plug-and-play with the Carrier i-Vu® building automation system
  • Supports demand limiting and optimal start for maximum energy savings
  • Supports up to 1,500 third-party BACnet points and up to 200 Modbus points for system integration
BACnet Support Conforms to the BACnet Building Controller (B-BC), BACnet Router (B-RTR, not applicable to -NR version), and BACnet BBMD (B-BBMD) device profiles as defined in BACnet standard135-2001 Annex L 2012
Communication Ports Gig-E: 10/100/1000 BaseT Ethernet port for BACnet/IP and/or BACnet/Ethernet and/or Modbus Ports TCP/IP communication
S1 ARC/MSTP: High-speed EIA-485 port with End of Net switch for connecting one of the following:
• BACnet ARCnet network at 156 kbps or BACnet MS/TP network at 9600 to 115.2 kbps
• Modbus RTU at 9600 to 115.2 kbps
S2 MSTP: Electrically isolated EIA-485 port with End of Net switch for connecting one of the following:
• BACnet MS/TP network at 9600 to 115.2 kbps
• Modbus RTU at 9600 to 115.2 kbps
Service: 10/100 Base T Ethernet port for system start-up and troubleshooting
IO Bus port: Provides communication for wired TruVu MPC I/O expanders that are powered by external power supplies.
IO Bus edge connector: 6-pin connector that provides communication and power to a directly-connected TruVu MPC I/O expander
Third Party Integration Supports up to 1,500 third-party BACnet points and 200 Modbus points (memory dependent).
Physical Fire-retardant plastic ABS, UL94-5VA
Universal Inputs 16 Bit A/D with 28 channels electronically configured to any of the following input types:
Dry Contact OR Pulse Counting inputs up to 60Hz OR Voltage (0-10 Vdc) OR Current (0-20 mA) OR Thermistor (Precon Type II 10kΩ OR Precon Type III 10kΩ OR Carrier YSI 5kΩ OR S-5700-850 10kΩ w/ 11kΩ shunt) OR RTD (Platinum RTD TS-8000 1kΩ @ 32°F (0.00385 TCR) OR Platinum RTD 1kΩ @ 32°F (0.00375 TCR) OR Nickel-iron RTD 1kΩ @ 70°F, 699 Ω @ -40°F OR Balco (Nickel-iron) TS8000 RTD 1kΩ @ 70°F, 779 Ω @ -40°F)
24VDC auxiliary sensor power: 200mA max. (AC power input) 500 mA max. (DC power input)
Universal Outputs D/A Resolution (analog out) 12 bits; 16 channels configurable to any of the following output types: Voltage (0-10 Vdc) OR Current (0-20 mA) OR Relay contacts, potential free, normally open, rated 24VAC/DC @ 1 Amp (resistive) Hand/Auto/Off override switches for all outputs, Potentiometer for manual adjustment of all analog outputs, Status LED for all outputs
Protection Two fast acting, 5mm x 20mm glass fuses:
• A 2.5A fuse for the TV-MPCXP1628’s power • A 4A fuse for the I/O bus edge connector.
The power and network ports comply with the EMC requirements EN50491-5-2.
Compliance United States of America: FCC compliant to Title CFR47, Chapter 1, Subchapter A, Part 15, Subpart B, Class A; UL listed to UL916, PAZX, Energy Management Equipment
Canada: Industry Canada Compliant, ICES-003, Class A; cUL listed UL 916, PAZX and Energy Management Equipment
Europe: EN50491-5-2:2009; Low Voltage Directive: 2014/35/EU; RoHS Compliant: 2011/65/EU
Australia and New Zealand: C-Tick Mark, AS/NZS 61000-6-3
Real Time Clock Real-time clock keeps track of time in the event of a power failure for up to 3 days.
Environmental Operating Range -40 to 158ºF (-40 to 70ºC) 10 to 95% RH, non-condensing