Skip to main content

AXIS™ Fan-Powered Zone Mixing Box
45X

50 to 6,200 Nominal Cfm

Access floor systems can provide flexibility and economic advantage when applied in commercial office building applications. A standard air-handling source can provide 55°F air; the 45X unit will blend the supply and return air to provide a typical 63°F air underfloor. This allows mixing to be done at a floor zone level and also allows colder 55 F air to be available for areas that may need additional cooling.

Performance Features

  • All units are shrink wrapped for complete protection while in transit
  • Double skin panel construction, excellent heat preservation
  • Thermal break casing construction
  • Built-in integrated control system
  • Chilled water, hot water, direct expansion (DX), and steam coils
  • Ultraviolet band C (UV-C) germicidal lamps
  • Multiple filtration from pleated to HEPA filters
  • Energy recovery ventilator (ERV) sections
  • Multiple fan options
  • Humidifiers for precise indoor climate conditioning
  • Internal and external face and bypass damper sections

Reliability Features

  • HDP high durability polyester exterior panel
  • Standard insulated, fully drainable, sloped drain pans in galvanized or stainless steel

Maintenance Features

  • Prepainted unit exterior
  • All service may be done through large, removable or hinged panels
  • Marine lights and viewports for interior component inspection

Installation Features

  • Units may be mounted in ceilings, closets, attics, etc.
  • Variable frequency drives are programmed and started up at the factory
  • Modular construction
  • Casing can be broken-down to individual panels and frame members

Factory-Installed Options

  • Pre-filter
  • Medium-efficiency filter
  • HEPA filter
  • Hot water coil
  • Steam coil
  • Electrical heater
  • Various humidifiers
  • Attenuator
  • Heat recovery devices

Performance Features

  • All units are shrink wrapped for complete protection while in transit
  • Double skin panel construction, excellent heat preservation
  • Thermal break casing construction
  • Built-in integrated control system
  • Chilled water, hot water, direct expansion (DX), and steam coils
  • Ultraviolet band C (UV-C) germicidal lamps
  • Multiple filtration from pleated to HEPA filters
  • Energy recovery ventilator (ERV) sections
  • Multiple fan options
  • Humidifiers for precise indoor climate conditioning
  • Internal and external face and bypass damper sections

Reliability Features

  • HDP high durability polyester exterior panel
  • Standard insulated, fully drainable, sloped drain pans in galvanized or stainless steel

Maintenance Features

  • Prepainted unit exterior
  • All service may be done through large, removable or hinged panels
  • Marine lights and viewports for interior component inspection

Installation Features

  • Units may be mounted in ceilings, closets, attics, etc.
  • Variable frequency drives are programmed and started up at the factory
  • Modular construction
  • Casing can be broken-down to individual panels and frame members

Factory-Installed Options

  • Pre-filter
  • Medium-efficiency filter
  • HEPA filter
  • Hot water coil
  • Steam coil
  • Electrical heater
  • Various humidifiers
  • Attenuator
  • Heat recovery devices

California residents please see Proposition 65