Carrier 39CC Custom Double-Wall Air Handler
Technical Specifications
At a glance
Construction
Custom Double-WallApplication
Indoor, OutdoorAirflow Range
1,000 - 300,000+CFM
Features
Key Features | Cabinet Construction | Panel Features | Base Features |
|---|---|---|---|
Indoor & outdoor units (39CCN / 39CCW) Bolted standing seam construction Foam panel construction 2-3-4 inch double wall Quality custom construction Specified to meet critical dimensions Variable aspect ratio Split locations Design for disassembly ASHRAE Standard 111 Class 6 or better at 1.5 times operating pressure Thermal Break and Standard Construction | Galvanealed steel 16 & 18 gauge 304 Stainless steel 16 & 18 gauge 316 Stainless steel 16 & 18 gauge Aluminum high strength 16 gauge Polyurethane powder coat paint ASTM B117 salt spray (min 2000 hours) Carrier Gray Color options | All panels are removable Double wall Thickness – 2”, 3”, & 4” available Foam or Fiberglass insulation Materials - liners Galvanized 304 Stainless steel 316 Stainless steel Aluminum Solid or Perforated | Structural channel base ASTM A36 steel All steel welded base structures Maximum floor support spacing – 24” Fan, coil & major component sections directly supported by base structure Fully insulated |
Floor Features | Roof Features | Door Features | Drain Pan Features |
Welded floor Standard - welds on 6” centers Full seam weld optional No penetrations through the floor Standard – heavy gauge galvanized Optional – Stainless steel & Aluminum Tread Plate option | Bolted standing seam construction Roof cleats Protect exposed seam Outdoor units ¼" per foot slope for drainage | High quality leak tight access doors Double wall - injected foam insulation Extruded aluminum frames Molded nylon conical roller-type latches Heavy duty hinges | 16 gauge 304 stainless steel Double wall 2” foam insulation Eliminated condensation under pan IAQ design – dual slope |
Options
Factory Options | Fan Options | Coil Options |
Energy Recovery Wheels Fixed plate heat exchangers Heat Pipe Gas heat Electric heat Airflow measurement Specialty fans Single point power Controls mounting & testing Factory mounted & wired VFD's Bypass panels Motor starter panels UL 508 listed panels Maintenance GFCI Service lights | Commercial duty Twin City Fans (preferred supplier) Airfoil plenum DWDI Forward curve Airfoil Backward Inclined Direct Drive plenum Static pressures to 12” CFM – 300,000+ AMCA certified – Standard 210 Bearings minimum L10-80,000 Hr Fan array design to meet schedule requirements Modular plenum fans with reduced noise levels | AHRI Certified Chilled & Hot water 5/8” OD Thickness - .020”, .025”, .035”, .049” Aluminum or Copper Fin Casings – 16 gauge 304SS DX Steam 5/8” or 1” Heresite coating UV Lights |