WeatherMaker® 50K

WeatherMaker® 50K Applied Rooftop Unit

Technical Specifications

At a glance

Type

Electric Cooling

Refrigerant

R-454B

Capacity Range

20 - 60 Tons

Features

Standard Features
 

Low global warming potential (GWP) Puron Advance™ refrigerant (R454B)

Refrigerant leak detection system with dissipation control

Uneven tandem scroll compressors for improved staging

Galvanized steel condensate drain pan

Single refrigerant circuit with fully active Al/Cu evaporator coil on 20-35 tons 

Dual refrigerant circuit with intertwined Al/Cu evaporator coil on 40-60 tons 

EXV metering devices for wide operating range 

Large MCHX condenser coils for reduced refrigerant charge and efficient operation 

Mechanical cooling from 50°F to 115°F ambient 

Belt drive indoor fan system with forward curve blowers 

Open drip proof (ODP) indoor fan motor with variable frequency drive (VFD) control for application flexibility

Multiple fan motor size selections

Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection 

Fully insulated cabinet with fiberglass insulation 

Manual outdoor air damper with outdoor air hoods 

Dedicated 2” pre-evaporator filter rack with MERV 5 filter 

Carrier SmartVu™ controls with 7” touchscreen display 

Standard DXLAT, OAT, and RAT sensors 

Multiple indoor fan control methods, including SAV, CV, SZ-VAV, multi-zone VAV duct pressure, or 3rd party input 

UL listed for compliance with UL Standard 60335-2-40 

Certified to AHRI Standard 340/360 

10kA short circuit current rating (SCCR)

 

Reliability Features
 

SmartVu controls with system monitoring and alarming

Liquid line filter drier to help protect refrigerant system

DX high and low-pressure protection

EXV metering devices optimize unit performance

Standard crank case heaters

 

Installation Features
 

Fits most legacy Carrier A & E curbs 

Heavy duty base rail with lifting lugs for easy rigging 

Dedicated supply and return configurations 

Provisions for thru-the-bottom power and control wiring 

Single point electric and gas connections 

Terminal block power connection 

Factory installed sensors for control operation

 

Maintenance Features
 

Dedicated high and low voltage control sections 

DX pressure and temperature sensors can be read from the SmartVu display, eliminating the need for external gauges 

Hinged doors on frequently accessed sections, including controls, filters, evaporator, and indoor fan motor 

Two-inch disposable return air filters with filter hook

 

Standard Limited Warranty
 

3-years parts only on MicroChannel condenser coil

5-years non pro-rated warranty on heat exchanger

One year standard parts only

Options

Factory-Installed Options
 
Electric Heat
 

High or low electric heat with two stage control

High or low electric heat with modulating silicon rectifier (SCR) control

 

Refrigerant Circuit
 

Lead, variable capacity digital compressor 

Low sound package includes shrouded, low sound condenser fans, low RPM motors, and sound blankets 

Low ambient package includes variable speed condenser fans to allow mechanical cooling down to -20°F (-28°C) 

High efficiency, low sound, low ambient package with Greenspeed® intelligence for improved part load efficiency, low ambient mechanical cooling, and low sound operation 

Humidi-MiZer® adaptive dehumidification system with modulating control

 

Construction
 

Double wall construction

Double wall construction with Agion® anti-microbial coating 

Double wall bottom for slab or dunnage mounted applications

 

Indoor Fan Motor
 

Shaft grounding rings 

VFD bypass 

TEFC indoor fan motor

 

Condenser & Evaporator Coils
 

E-Coat MCHX Condenser 

E-Coat Al/Cu Evaporator 

Stainless Steel Drain Pan

 

Controls
 

Humidity and enthalpy sensing (OARH & RARH) for dehumidification or free cooling control 

Return air CO₂ sensor for ventilation control

 

Outdoor Air & Relief
 

Ultra-low leak economizer for ventilation and free cooling 

Barometric relief 

Multi-stage power exhaust with staged control 

Multi-stage power exhaust with staged building pressure control 

Power & control for accessory multi-stage power exhaust with staged building pressure control 

Power & control for accessory high-capacity power exhaust with modulating building pressure control

 

Service & Safety
 

Condensate overflow switch 

Pre-filter status switch with access door retainers 

Service pack with compressor isolation valves. replaceable core filter drier, extended lube lines 

Return air smoke detector 

Chicago refrigerant relief valve

 

Electrical
 

Non-fused disconnect 

Powered or un-powered convenience outlet 

Phase monitor 

High short circuit current rating (65kA for 208/230/460V, 25kA for 575V)

 

Indoor Air Quality (IAQ)
 

2” pre-evaporator filter rack with 2” MERV 8 filters 

4” pre-evaporator filter rack with 4” MERV 8 or 13 filters 

Factory-installed UV-C fixture with wiring, disconnect switch, door interlocks, and access door with UV safe view port

Accessories

Field-Installed Accessories
 
 
Indoor Air Quality
 

Return air CO₂ sensor 

CO₂ space sensor 

CO₂ aspirator box

UV-C Emitters

 

Building Pressure
 

Multi-stage power exhaust with staged building pressure control 

High-capacity power exhaust with modulating building pressure control 

Barometric relief

 

Controls
 

Return air CO₂ sensor 

Smoke detector 

Dirty filter switch 

Non-communicating space sensors, including temperature and humidity 

Communicating space sensors, including temperature and humidity 

Space CO₂ sensors 

Carrier i-Vu® Equipment Touch display 

Thermostats

 

Miscellaneous Options
 

14-inch Roof Curb

Physical Data

SizeNominal Capacity
(tons)
Standard Airflow
(Cfm)
Gross Cooling
(Btuh)
Low Electric Heating Capacity
(kW)
High Electric Heating Capacity
(kW)
Base Weight
(lbs)
Length
(in)
Width
(in)
Height
(in)
0202080002403672316913'-9"7'-10"6'-1⅛"
02625100002783672319913'-9"7'-10"6'-1⅛"
03030120003083672319913'-9"7'-10"6'-1⅛"
03435140003403672319913'-9"7'-10"6'-1⅛"
04040160004153672429017'-11"7'-10"6'-1⅛"
05050180005003672427217'-11"7'-10"6'-1⅛"
060602400062554108579325'-11"7'-10"6'-1⅛"

*Standard chassis/vertical airflow. See your Carrier representative for information and other configurations.

Documents

Accessory and Kit Data

Louvered Hail Guard Accessory for 48/50K

Compressor Sound Blanket Accessory for 48/50K

Roof Curb Accessory for 48/50K

Power Exhaust and Barometric Relief Accessories for 48/50K

RNET Harness Accessory for 48/50K 20-60 Tons and 48/50V 27.5-100 Tons, P/N CRRNETPH001A00

Ultraviolet Lamp Accessory for 48/50K, 48/50V

Return Smoke Detector Accessory for 48/50K

High-Capacity Power Exhaust Accessories for 48/50K 20-60, Part Numbers: CRPWREXH071A01 – CRPWREXH079A01

Brochure

Light Commercial and Applied Packaged Rooftop Unit Line Card

Controls

SmartVu™ Controls Version 3.X for Applied Rooftop Gas Heat/Electric Cooling and Electric Heat/Electric Cooling Units with PIC 6.1 Hardware

Guide Specifications

50K Guide Specifications, 20 to 60 Nominal Tons

Installation

50K 20-60 WeatherMaker® Electric Cooling and Optional Electric Heating Applied Rooftop Units with Puron Advance™ Refrigerant (R-454B) and Carrier SmartVu™ Controls

Maintenance

50K 20-60 WeatherMaker® Electric Cooling Applied Rooftop Units with Puron Advance™ Refrigerant (R-454B) and Carrier SmartVu™ Controls with PIC 6.1 Hardware and Software 2.X

Product Data

48/50K WeatherMaker® Applied Rooftop Units 20 to 60 Nominal Tons

REVIT and 3D DRW Files

48/50K Family REVIT Files

50K 20-34 Ton Electric Family REVIT Files

Warranty Card

Limited Warranty - 50K and 50V Commercial Rooftop Equipment

Need assistance? Ask Carrier.

Find an expert