33CSCPACHP-01 and 33CSCPACHP-FC Comfort™ Pro Programmable Commercial Thermostat
Comfort™ Pro Commercial Non-Communicating Programmable Thermostat
Technical Specifications
Features
Non-mercury, non-lead based electronic controls built into slim plastic enclosure
2-stage heat/2-stage cool with auxiliary heat (air conditioning, heat pump and water source heat pump units)
Proportional integral control of heating and cooling stages
Remote sensing and averaging with occupancy override
Keypad lockout security with passcode protection
Touch·N·Go® programmability — occupied, unoccupied and demand limit buttons with preset heating and cooling set points
5/2-day or all days programmable or non-programmable
4 or 2 periods per day selectable
24 vac or battery powered user configured settings are stored for an unlimited period of time
Random start, smart recovery
Physical Data
| Specification | Details |
| Dimensions | 5.2-in x 5.2-in x 1.2-in |
| Appearance | White plastic with grey trim, smooth cover |
| Weight | Approx. 0.5 lbs |
| Power Requirements | 24 vac 50/60 Hz at 3 va RC/RH compatible AA alkaline battery power also available (batteries not included) |
| Environmental Range | 32°F to 104°F operational, -40°F to 135°F storage |
| Humidity | 0–95% RH, non-condensing |
| Agency Approvals | FCC Part 15, Subpart J compliant CE mark approval |
| Electrical Characteristics | Inputs: 24 vac, 50/60 Hz, 3 va Outputs: Minimum Load = 1000 ohms, Maximum Load = 2.0 A, 50% pf (power factor) Inductive, Nominal Load Capacity = 1.5 Amps |
| Temperature Control | The thermostat uses proportional integral calculation to determine the number of stages required for heating or cooling (and fan speed for fan coil units) to provide accurate temperature control. |
Documents
Product Data