Technical Specifications

Performance Features

Exceeds ASHRAE 90.1 and Energy Star efficiency levels, as well as Consortium for Energy Efficiency (CEE) criteria

6, 7.5, and 10 ton nominal capacities with three-stage cooling capacity control

Up to 17.5 SEER and 20.8 IEER

6 to 10 ton models have standard cooling operation up to 125 °F (52°C) and down to 40°F (4°C)

EcoBlue™ vane axial supply fan with ECM motor provides up to 3” of external static capability at up to 350 CFM/ton

Modulating hot gas reheat for supply air temperature control with dehumidification

Maintenance Features

SmartVu control provides service reminders and alarming capability

Factory installed suction and discharge pressure sensors, readable from the SmartVu control interface

Hinged access panels on filter, control box, compressor, and supply fan motor compartments.

Innovative, easy starting, no-strip screw feature on remaining service panels

Two-inch disposable return air filters

Direct drive evaporator fan motor eliminates belt maintenance

Foil face insulation resists dirt entrapment and is wipe down capable

Installation Features

Field convertible from vertical to horizontal airflow (accessory kit required for size 08-10)

Provisions for thru-the-bottom power entry capability as standard

Single point electric, gas, and controls connections

Full perimeter base rail with built-in rigging adapters and fork truck slots

Factory installed OAT, OARH, RAT, RARH, and SARH sensor

Factory supplied, field installed SAT sensor

SmartVu control provides application and control flexibility

Reliability Features

Scroll compressors with internal line-break overload protection

24-volt control circuit protected with resettable circuit breaker

Permanently lubricated, direct drive supply fan motor

Totally enclosed condenser motors with permanently lubricated bearing

High-pressure switch protection

Refrigerant circuit pressure monitoring

Standard Limited Warranty

5 years parts only compressor

One year parts only on all other parts

Extended warranty packages available

Factory-Installed Options

Medium or high electric heat with silicon rectifier control (SCR)

Return air or supply air smoke detector

Return air carbon dioxide (CO₂) sensor

High static direct drive supply fan motor

Duct pressure transducer for duct pressure control of supply fan speed

Building pressure transducer for zone pressure control of supply fan speed

Pre-coat or E-coat condenser or evaporator/HGRH coil

Louvered hail guards

Ultra low leak economizer with barometric relief

4” filter rack with MERV 8 or MERV 13 filters

Powered or non-powered convenience outlet

HACR circuit breaker or non-fused disconnect

Through the base electric & gas connections

Double wall construction with galvanized steel liner over R4 insulation

Field-Installed Accessories

Knockdown roof curbs

Modulating power exhaust

Supply duct cover for vertical to horizontal supply conversion (size 08-12)

Through the base electric & gas connections

4” filter rack with MERV 8 or MERV 13 filters

Louvered hail guards

Return air or supply air smoke detector

Horn/strobe annunciator and remote test/reset station for smoke detector

Return air carbon dioxide (CO₂) sensor