Technical Specifications

Primary air temperature and pressure sensors determine system operating mode to ensure proper operation in case of communication failure.

Air Source leaving air temperature protection minimizes the occurrence of heating and/or cooling lockouts based on unacceptable discharge temperatures.

Quick and easy commissioning and balancing process via a dedicated maintenance table

Stand-alone or linked system operation

Carrier linkage system capability

Foreign language support for ASCII based character sets

Carrier communicating network device

High-speed (38.4K baud) communications network

Thermistor type duct temperature sensor

Pressure sensor

UL94-5V plenum rated controller housing

Actuator preassembled to housing and rated at 35 in.-lb (3.95 N-m) torque, an adjustable 90-degree stroke, and provides 90-second nominal timing at 60 Hz

Actuator assembly has an integrated conduit box and cover

Both covers for the control are hinged

Actuator suitable for mounting onto a 3/8-in. (9.5 mm) square or round VVT box damper shaft or onto a 1/2-in. (13 mm) round damper shaft. The minimum VVT box damper shaft length is 13/4-in. (45 mm)

Actuator will operate with dampers having 90, 60, and 45 degree strokes

Mounts directly onto pressure dependent box damper shaft

Can drive up to 4 linked damper actuators

Designed for vertical or horizontal mounting

Both controller housing and actuator are UL94-5V plenum rated

Control complies with ASHRAE 62.1