Technical Specifications

Performance Features

All units are shrink wrapped for complete protection during transit

Air-flows ranging from 1,800 to 15,000 nominal cfm

Horizontal and vertical draw-thru arrangements

Single or double wall construction

Belt driven, forward curved blowers

Chilled water, hot water, direct expansion (DX), and steam coils

Various coil face areas, fin densities, and circuiting arrangements

Electric preheat available over a wide kW range

Dual refrigerant circuits

Parallel blade dampers on mixing boxes

1-1/2 lb density insulation or optional foil-faced 3 lb density insulation

Water and steam coil performance rated and certified; and refrigerant coil performance rated in accordance with AHRI 410

Fan airflow performance rated and certified in accordance with AHRI 430

Reliability Features

Galvanized steel construction

Precision-balanced fan wheels limit vibration and eliminate abnormal stress on bearings and other components

Internally mounted motor and belt drive package

Sloped, double-wall stainless steel drain pan complies with ASHRAE Standard 62

ETL certified

Maintenance Features

Double-wall hinged access panels

Blower housing serviceable without disconnecting ductwork

Rugged pillow-block bearings rated at 200,000 hours average life

Tool-less filter change

2-in. or 4-in. flat and angled filter sections

Installation Features

Units may be mounted in ceilings, closets, attics, etc.

Ducted or free return connections

Field convertible discharge

Suspension hardware

Lifting brackets to facilitate unit rigging

Small footprint

Standard Limited Warranty

One-year parts only

Extended warranty packages available

Factory-Installed Options

Stainless steel condensate drain pan

Coil type options: Chilled water coils, Hot water coils, DX coils, Steam coils, Electric heat coils, Copper coils

Coil face area, fin density, and circuiting arrangement options

Blower motor and belt drive package

Flat or angled filter section (2 in. or 4 in.)

Single or double wall construction

Horizontal or vertical arrangements

1-1/2 lb density insulation or foil-faced 3 lb density insulation

Field-Installed Accessories

TXV (thermostatic expansion valve) packages

Marine light installation kit

Viewport installation kit

Filter kits

Suspension hardware

^{*Capacities based on small face area coil @ 500 ft/min.}

^{Dimensions are for typical 39LB cooling only.}