Skip to main content

Idrofan® - Hydraulic slim ducted fan coil unit
42EP

Cooling capacity : 0.4-4.2 kW

Heating capacity : 0.5-5.0 kW

Air flow : 70-755 m³/h

  • Ductable unit for suspended ceiling or raised floor
  • Extra flat unit for better integration in renovation or new build projects
  • Optimized energy consumption level
  • Flexible configuration to meet the different requirements of buildings
  • Managed comfort

This range exists in 3 casing sizes. Each size is available in:

  • 2 pipes, for heating and/or cooling mode
  • 2 pipe+ electrical heater, for heating and/or cooling + electrical mode
  • 4 pipe for cooling and heating mode

General description

  • New generation slimline ductable fan coil (150 mm high) which can be adapted to both the new build and renovation markets to gain height underneath the suspended ceiling and improve the well-being of occupants.
  • The 42EP is available for fitting either in a suspended ceiling or a raised floor
  • Equipped with an innovative fan combined with a low energy consumption (LEC) electronically commutated motor that meets the new building energy performance objectives thanks to auto-adaptive adjustment of the air flow rate from 0 to 100% ensuring perfect cooling and heating conditions in the room.

Configuration flexibility

Each size of the 42EP can be supplied

  • with free return and/or direct air supply
  • with a rectangular sleeve on the return and/or on the supply air
  • with return plenums and/or supply air plenums to meet the requirements of installations with spigots with a diameter of 125 mm
comparative-table-Carrier-regulations-v2-en

This table provides a quick and easy overview of the key features of our products. To learn more about them and make the best choice, consult their detailed product sheet.

*Stand alone : Lead/lag configurable via the device for the application once the KNX bus is connected. BMS not required in this case.

This range exists in 3 casing sizes. Each size is available in:

  • 2 pipes, for heating and/or cooling mode
  • 2 pipe+ electrical heater, for heating and/or cooling + electrical mode
  • 4 pipe for cooling and heating mode

General description

  • New generation slimline ductable fan coil (150 mm high) which can be adapted to both the new build and renovation markets to gain height underneath the suspended ceiling and improve the well-being of occupants.
  • The 42EP is available for fitting either in a suspended ceiling or a raised floor
  • Equipped with an innovative fan combined with a low energy consumption (LEC) electronically commutated motor that meets the new building energy performance objectives thanks to auto-adaptive adjustment of the air flow rate from 0 to 100% ensuring perfect cooling and heating conditions in the room.

Configuration flexibility

Each size of the 42EP can be supplied

  • with free return and/or direct air supply
  • with a rectangular sleeve on the return and/or on the supply air
  • with return plenums and/or supply air plenums to meet the requirements of installations with spigots with a diameter of 125 mm
comparative-table-Carrier-regulations-v2-en

This table provides a quick and easy overview of the key features of our products. To learn more about them and make the best choice, consult their detailed product sheet.

*Stand alone : Lead/lag configurable via the device for the application once the KNX bus is connected. BMS not required in this case.

carrier-idrofan-42ep
Idrofan® 42EP
The new Carrier ultra-slim FCU increases potential yields throughout the supply chain, whilst allowing for creative building design without compromising on performance.

Documents