Skip to main content

Idrofan® - High wall fan coil
42WM

Cooling capacity : 1.2-3.8 kW

Heating capacity : 1.3-4.3 kW

The 42WM is an hydraulic high wall fan coil available in 2 models and 4 sizes. The modern and appealing design of the unit in RAL 9003 colour allows the use in any environment.

  • Easy installation
  • Modern & design
  • Low energy consumption
  • Low noise level

  • 2 models and 4 sizes
  • Cooling capacity from 1.2 kW to 3.8kW
  • 2 versions :
    • 2 pipe system heating or cooling
    • 2 pipe and electrical heater cooling and/or heating + electrical heater

Casing

  • Made of auto-extinguishing ABS UL94 HB plastic with high specifications and great resistance to aging. The diffusion flap is adjusted manually in the basic version, with remote control in T version

Air Filter

  • Washable-regenerable synthetic filter, readily accessible

Fan Assembly

  • Made of plastic tangential fan

Electric motor

  • AC version
    • For single phase power supply and has six speeds, three of which are connected, with capacitor
    • Fitted on sealed for life bearings and is secured on anti-vibration and self-lubricating mountings
    • Internal thermal protection with automatic reset, protection IP20, class B
  • EC version
    • Electronic motor with permanent magnet brushless that is controlled with reconstructed current according to a BLAC sinusoidal wave

Heat exchange coil

  • Manufactured from drawn copper tube and the aluminum fins are mechanically bonded onto the tube by an expansion process
  • Not suitable for use in corrosive atmosphere or in environments where aluminum may be subject to corrosion
  • Electrical heater
    • Hermetically sealed and supplied inside the battery pipes
    • Single phase 230V supply
    • Fitted with overheat protection
    • Two safety thermostats: manual or automatic reset
  • 2 way valve
  • 3 way valve
  • ON/OFF 230V actuator
  • Control with infre-red remote
  • Condensate drain pump
  • Kit 2 way valve
  • Kit 3 way valve
  • 2 models and 4 sizes
  • Cooling capacity from 1.2 kW to 3.8kW
  • 2 versions :
    • 2 pipe system heating or cooling
    • 2 pipe and electrical heater cooling and/or heating + electrical heater

Casing

  • Made of auto-extinguishing ABS UL94 HB plastic with high specifications and great resistance to aging. The diffusion flap is adjusted manually in the basic version, with remote control in T version

Air Filter

  • Washable-regenerable synthetic filter, readily accessible

Fan Assembly

  • Made of plastic tangential fan

Electric motor

  • AC version
    • For single phase power supply and has six speeds, three of which are connected, with capacitor
    • Fitted on sealed for life bearings and is secured on anti-vibration and self-lubricating mountings
    • Internal thermal protection with automatic reset, protection IP20, class B
  • EC version
    • Electronic motor with permanent magnet brushless that is controlled with reconstructed current according to a BLAC sinusoidal wave

Heat exchange coil

  • Manufactured from drawn copper tube and the aluminum fins are mechanically bonded onto the tube by an expansion process
  • Not suitable for use in corrosive atmosphere or in environments where aluminum may be subject to corrosion
  • Electrical heater
    • Hermetically sealed and supplied inside the battery pipes
    • Single phase 230V supply
    • Fitted with overheat protection
    • Two safety thermostats: manual or automatic reset
  • 2 way valve
  • 3 way valve
  • ON/OFF 230V actuator
  • Control with infre-red remote
  • Condensate drain pump
  • Kit 2 way valve
  • Kit 3 way valve

Works well with