Skip to main content

Global Chiller
30HXC

Water-Cooled
Liquid Screw Chiller
with R-134a refrigerant
Source: France

286 to 1302 Nominal kW
81 to 370 Nominal Tons

The 30HXC units are freshwater- or seawater-cooled chillers, designed from the ground up to meet the needs of today and tomorrow:

  • Non-ozone depleting HFC-134a refrigerant.
  • Screw compressors.
  • Fits through narrow access doors without disassembly.
  • Mechanically cleanable evaporators and condensers.
  • Wide range of marine & offshore customizations.

All units are equipped with Pro-Dialog Plus control to optimize the efficiency of the refrigerant circuit.

Performance Features

  • Chlorine-free R-134a HFC refrigerant.
  • Low energy consumption during part load and full load operation.
  • Twin-rotor, gear-driven, multiple screw compressors allow precise capacity matching of building load changes and significantly reduce unit power input, especially at part-load.
  • Flooded multi-pipe heat exchangers for increased heat exchange efficiency.
  • Leaving-fluid temperature directly controlled to within 0.5° F (0.3° C).
  • Entering-fluid temperature continuously monitored to detect flow or load changes.
  • Compatible with multi-protocol communication links to shipboard automation.
  • Electronic expansion device permits operation at a lower condensing pressure and improved utilization of the evaporator heat exchange surface.

Reliability Features

  • Two independent refrigerant circuits - the second one takes over automatically, when the first one malfunctions, maintaining partial cooling under all circumstances.
  • Low voltage control circuits.
  • Short cycle protection.
  • Dual chiller control.
  • Temperature reset from return fluid.
  • Electronic paddle-free flow switch, pre-installed on evaporator.
  • Electronic refrigerant gauges.
  • Heat exchangers available with class approval (DNV-GL, BV, LR).

Maintenance Features

  • Hermetic twin screw compressors.
  • Mechanically cleanable condenser and evaporator.
  • Alarm contacts.
  • Filter drier.
  • Moisture indicating sight glass.
  • Pro-Dialog Plus monitors all chiller safety parameters.
  • Remote management capabilities.

Installation Features

  • Unit width of 980 – 1015 mm (38.6 – 40.0 in.) across the range.
  • Main disconnect switch with high trip capacity.
  • Transformer supply to the integrated control circuit.

Standard Warranty

  • Commercial marine warranty 18 months after shipment or 12 months after commissioning.
  • Extended warranties available.

Options

  • IP44C electrical protection level.
  • Tropicalization.
  • Soft starter.
  • Unit supplied in two assembled parts.
  • 460-3-60 power supply.
  • 380-3-60 power supply.
  • Evaporator pump electrical power/control circuit.
  • Dual evaporator pump electrical power/control circuit.
  • Condenser pump electrical power/control circuit.
  • Compressor suction valve.
  • Evaporator with one pass less.
  • Condenser with one pass less.
  • 21 bar evaporator.
  • 21 bar condenser.
  • Reversed evaporator water connections.
  • Reversed condenser water connections.
  • JBus/ModBus gateway.
  • BACnet® gateway
  • LON gateway
  • Control for low condensing temperature systems
  • RS 485 communication interface with open protocol
  • Leak detection
  • Flanged evaporator water connection kit
  • Flanged condenser water connection kit

Physical data for sizes 080 to 140

30HXC 080 090 100 110 120 130 140
Nominal capacity (kW) 287 312 348 375 413 450 510
Operating weight (kg)† 2274 2279 2302 2343 2615 2617 2702
Dimensions
Length (mm) 2558 2558 2558 2565 3275 3275 3275
Depth (mm) 980 980 980 980 980 980 980
Height (mm) 1800 1800 1800 1850 1816 1816 1816
Compressors 06N semi-hermetic twin-screw compressor
Quantity, circuit A/B 1/1 1/1 1/1 1/1 1/1 1/1 1/1
Capacity control Pro-Dialog Plus control
No. of control steps 6 6 6 6 6 6 6
Refrigerant R-134a
Evaporator Shell and tube with internally finned copper tubes
Condenser Shell and tube with internally finned copper (freshwater-cooled) or 90/10 Cu/Ni (seawater-cooled) tubes

Physical data for sizes 155 to 285

30HXC 155 175 190 200 230 260 285
Nominal capacity (kW) 543 600 652 701 814 899 987
Operating weight (kg)†  2712 3083 3179 3873 4602 4656 4776
Dimensions
Length (mm) 3275 3275 3275 3903 3924 3924 3924
Depth (mm) 980 980 980 1015 1015 1015 1015
Height (mm) 1816 1940 1940 1980 2060 2060 2060
Compressors 06N semi-hermetic twin-screw compressor
Quantity, circuit A/B 1/1 1/1 1/1 2/1 2/1 2/1 2/1
Capacity control Pro-Dialog Plus control
No. of control steps 6 6 6 8 8 8 8
Refrigerant R-134a
Evaporator Shell and tube with internally finned copper tubes
Condenser Shell and tube with internally finned copper (freshwater-cooled) or 90/10 Cu/Ni (seawater-cooled) tubes

Physical data for sizes 310 to 375

30HXC 310 345 375
Nominal capacity (kW) 1109 1207 1302
Operating weight (kg)† 5477 5553 5721
Dimensions
Length (mm) 4533 4533 4533
Depth (mm) 1015 1015 1015
Height (mm) 2112 2112 2112
Compressors 06N semi-hermetic twin-screw compressor
Quantity, circuit A/B 2/2 2/2 2/2
Capacity control Pro-Dialog Plus control
No. of control steps 10 10 10
Refrigerant R-134a
Evaporator Shell and tube with internally finned copper tubes
Condenser Shell and tube with internally finned copper (freshwater-cooled) or 90/10 Cu/Ni (seawater-cooled) tubes

Performance Features

  • Chlorine-free R-134a HFC refrigerant.
  • Low energy consumption during part load and full load operation.
  • Twin-rotor, gear-driven, multiple screw compressors allow precise capacity matching of building load changes and significantly reduce unit power input, especially at part-load.
  • Flooded multi-pipe heat exchangers for increased heat exchange efficiency.
  • Leaving-fluid temperature directly controlled to within 0.5° F (0.3° C).
  • Entering-fluid temperature continuously monitored to detect flow or load changes.
  • Compatible with multi-protocol communication links to shipboard automation.
  • Electronic expansion device permits operation at a lower condensing pressure and improved utilization of the evaporator heat exchange surface.

Reliability Features

  • Two independent refrigerant circuits - the second one takes over automatically, when the first one malfunctions, maintaining partial cooling under all circumstances.
  • Low voltage control circuits.
  • Short cycle protection.
  • Dual chiller control.
  • Temperature reset from return fluid.
  • Electronic paddle-free flow switch, pre-installed on evaporator.
  • Electronic refrigerant gauges.
  • Heat exchangers available with class approval (DNV-GL, BV, LR).

Maintenance Features

  • Hermetic twin screw compressors.
  • Mechanically cleanable condenser and evaporator.
  • Alarm contacts.
  • Filter drier.
  • Moisture indicating sight glass.
  • Pro-Dialog Plus monitors all chiller safety parameters.
  • Remote management capabilities.

Installation Features

  • Unit width of 980 – 1015 mm (38.6 – 40.0 in.) across the range.
  • Main disconnect switch with high trip capacity.
  • Transformer supply to the integrated control circuit.

Standard Warranty

  • Commercial marine warranty 18 months after shipment or 12 months after commissioning.
  • Extended warranties available.

Options

  • IP44C electrical protection level.
  • Tropicalization.
  • Soft starter.
  • Unit supplied in two assembled parts.
  • 460-3-60 power supply.
  • 380-3-60 power supply.
  • Evaporator pump electrical power/control circuit.
  • Dual evaporator pump electrical power/control circuit.
  • Condenser pump electrical power/control circuit.
  • Compressor suction valve.
  • Evaporator with one pass less.
  • Condenser with one pass less.
  • 21 bar evaporator.
  • 21 bar condenser.
  • Reversed evaporator water connections.
  • Reversed condenser water connections.
  • JBus/ModBus gateway.
  • BACnet® gateway
  • LON gateway
  • Control for low condensing temperature systems
  • RS 485 communication interface with open protocol
  • Leak detection
  • Flanged evaporator water connection kit
  • Flanged condenser water connection kit

Physical data for sizes 080 to 140

30HXC 080 090 100 110 120 130 140
Nominal capacity (kW) 287 312 348 375 413 450 510
Operating weight (kg)† 2274 2279 2302 2343 2615 2617 2702
Dimensions
Length (mm) 2558 2558 2558 2565 3275 3275 3275
Depth (mm) 980 980 980 980 980 980 980
Height (mm) 1800 1800 1800 1850 1816 1816 1816
Compressors 06N semi-hermetic twin-screw compressor
Quantity, circuit A/B 1/1 1/1 1/1 1/1 1/1 1/1 1/1
Capacity control Pro-Dialog Plus control
No. of control steps 6 6 6 6 6 6 6
Refrigerant R-134a
Evaporator Shell and tube with internally finned copper tubes
Condenser Shell and tube with internally finned copper (freshwater-cooled) or 90/10 Cu/Ni (seawater-cooled) tubes

Physical data for sizes 155 to 285

30HXC 155 175 190 200 230 260 285
Nominal capacity (kW) 543 600 652 701 814 899 987
Operating weight (kg)†  2712 3083 3179 3873 4602 4656 4776
Dimensions
Length (mm) 3275 3275 3275 3903 3924 3924 3924
Depth (mm) 980 980 980 1015 1015 1015 1015
Height (mm) 1816 1940 1940 1980 2060 2060 2060
Compressors 06N semi-hermetic twin-screw compressor
Quantity, circuit A/B 1/1 1/1 1/1 2/1 2/1 2/1 2/1
Capacity control Pro-Dialog Plus control
No. of control steps 6 6 6 8 8 8 8
Refrigerant R-134a
Evaporator Shell and tube with internally finned copper tubes
Condenser Shell and tube with internally finned copper (freshwater-cooled) or 90/10 Cu/Ni (seawater-cooled) tubes

Physical data for sizes 310 to 375

30HXC 310 345 375
Nominal capacity (kW) 1109 1207 1302
Operating weight (kg)† 5477 5553 5721
Dimensions
Length (mm) 4533 4533 4533
Depth (mm) 1015 1015 1015
Height (mm) 2112 2112 2112
Compressors 06N semi-hermetic twin-screw compressor
Quantity, circuit A/B 2/2 2/2 2/2
Capacity control Pro-Dialog Plus control
No. of control steps 10 10 10
Refrigerant R-134a
Evaporator Shell and tube with internally finned copper tubes
Condenser Shell and tube with internally finned copper (freshwater-cooled) or 90/10 Cu/Ni (seawater-cooled) tubes
SEE ALSO
WORKS WITH
CONTROLS