Skip to main content

Airstream™
42C

Horizontal Fan Coils

340 to 2,039 m³/h
200 to 1,200 cfm

42CA - Furred-in
42CE - Furred-in with plenum
42CG - Cabinet
42CK - Cabinet, ducted

Ideal for any passenger-occupied space, 42 series fan coils combine heating and cooling performance with easy, low-cost installation. The 42C units are designed to occupy a minimum space, using furred-in, painted cabinet, or telescoping bottom panel models.

Performance Features

  • Airflow capacities from 200 to 1200 cfm.
  • 2-pipe or 4-pipe system combinations.
  • Economical, 3-speed fans deliver the right amount of conditioned air for comfort needs at any load.
  • Optional electronically commutated motors deliver peak operating efficiency.
  • Sound-absorbing insulation is used to line the cabinet.
  • Certified performance in accordance with AHRI Standard 440.

Reliability Features

  • Coils are factory leak tested at 300 psig air pressure with coil submerged in water.
  • All equipment wiring complies with NEC requirements.
  • Optional electric heaters are fully sheathed for marine applications.
  • Unit casing meets UL 181 and NFPA 90A standards.

Maintenance Features

  • Cleanable or throwaway filters available.
  • Removable panels make access to components and connections easy.
  • Label information adhered to each unit includes model, size, coil information, electrical information, and tagging data.
  • Units include stainless steel marine double drain pan for positive drainage during pitch and roll.

Installation Features

  • Piping, drain, and wiring connections are readily accessible.
  • Factory-installed controls.
  • Single point electrical connection.
  • Pre-drilled mounting holes and slots.
  • Compact unit casing accommodates installation in reduced ceiling plenum space.
  • Valve packages available.

Standard Warranty

  • One-year parts.

Factory-Installed Options

  • 3-speed switches.
  • Line voltage thermostats.
  • 24V Carrier Debonair® programmable or non-programmable thermostats.
  • Product Integrated direct digital electronic controls (i-Vu® control system using BACnet® protocol).
  • Chilled water or direct expansion cooling coils.
  • Hot water or steam heating coils.
  • Total or auxiliary electric heat (fully sheathed).
  • Service switches.
  • Custom colors.
  • Permanent or throwaway filters.
  • Automatic air vent and drain on water coils.
  • Double deflection discharge grilles.
  • Tell-tale drains and stainless steel drain pans.
  • Condensate overflow switch.
  • Dual density fiberglass, foil faced fiberglass or closed cell insulation.
  • PSC, High Static PSC, or ECM motors.
  • Seismic certified construction (OSHPD & IBC).

Field-Installed Accessories

  • Remote mounted thermostats.
  • Valve packages factory wired and assembled for field mounting.
  • Drip lips for collection of condensate under valve packages.

Physical Data (Sizes 02-06)

Size 02 03 04 06
Nominal airflow cfm 200 300 400 600
Shipping weight (lb.)*
42CA 36 39 49 59
42CE 55 60 70 82
42CG 98 118 126 168
42CK 115 120 135 150
Coil water weight (approx. lb per row of coil) 0.7 0.8 1.0 1.4
Coils (fins per in.) 10 10 10 10
Coil face area (sq. ft.) 0.8 1.1 1.4 1.9
Motor (qty) 42C only 1 1 1 1
Blower (qty) 1 1 2 2
Filters nominal size (in.) (1-inch thick)
42CA N/A N/A N/A N/A
42CE† 10 x 18 10 x 22 10 x 28 10 x 33
42CG (bottom return) 10 x 23½ 10 x 28 10 x 32½ 10 x 37
42CG (rear return) 8 x 23½ 8 x 28 8 x 32½ 8 x 37
42CK (bottom return) 10 x 28 10 x 28 10 x 33 10 x 45
42CK (rear return) 7 x 21 7 x 21 7 x 27 7 x 38
Qty 1 1 1 1
Supply duct collar 1-in. 1-in. 1-in. 1-in.
Piping connections (sweat) (in.)
Coil outlet and inlet ⅝OD ⅝OD ⅝OD ⅝OD
Drain connection ⅞OD ⅞OD ⅞OD ⅞OD
Tell-tale drain ⅝OD ⅝OD ⅝OD ⅝OD

Physical Data (Sizes 08-12)

Size 08 10 12
Nominal airflow cfm 800 1000 1200
Shipping weight (lb.)*
42CA 64 95 107
42CE 95 135 157
42CG 176 215 245
42CK 155 227 241
Coil water weight (approx. lb per row of coil) 1.7 2.3 2.7
Coils (fins per in.) 10 10 10
Coil face area (sq. ft.) 2.3 3.2 3.7
Motor (qty) 42C only 1 2 2
Blower (qty) 2 4 4
Filters nominal size (in.) (1-inch thick)
42CA N/A N/A N/A
42CE† 10 x 40 10 x 54 10 x 62
42CG (bottom return) 10 x 41 10 x 54½ 10 x 63
42CG (rear return) 8 x 41 8 x 54½ 8 x 63
42CK (bottom return) 10 x 45 10 x 62 10 x 62
42CK (rear return) 7 x 38 7 x 52 7 x 52
Qty 1 1 1
Supply duct collar 1-in. 1-in. 1-in.
Piping conn. (sweat) (in.)
Coil outlet and inlet ⅝OD ⅝OD ⅝OD
Drain connection ⅞OD ⅞OD ⅞OD
Tell-tale drain ⅝OD ⅝OD ⅝OD

*Calculate operating weight of unit: shipping weight + coil water weight x number of coil rows.
†Filter size if located in return-air plenum.

Performance Features

  • Airflow capacities from 200 to 1200 cfm.
  • 2-pipe or 4-pipe system combinations.
  • Economical, 3-speed fans deliver the right amount of conditioned air for comfort needs at any load.
  • Optional electronically commutated motors deliver peak operating efficiency.
  • Sound-absorbing insulation is used to line the cabinet.
  • Certified performance in accordance with AHRI Standard 440.

Reliability Features

  • Coils are factory leak tested at 300 psig air pressure with coil submerged in water.
  • All equipment wiring complies with NEC requirements.
  • Optional electric heaters are fully sheathed for marine applications.
  • Unit casing meets UL 181 and NFPA 90A standards.

Maintenance Features

  • Cleanable or throwaway filters available.
  • Removable panels make access to components and connections easy.
  • Label information adhered to each unit includes model, size, coil information, electrical information, and tagging data.
  • Units include stainless steel marine double drain pan for positive drainage during pitch and roll.

Installation Features

  • Piping, drain, and wiring connections are readily accessible.
  • Factory-installed controls.
  • Single point electrical connection.
  • Pre-drilled mounting holes and slots.
  • Compact unit casing accommodates installation in reduced ceiling plenum space.
  • Valve packages available.

Standard Warranty

  • One-year parts.

Factory-Installed Options

  • 3-speed switches.
  • Line voltage thermostats.
  • 24V Carrier Debonair® programmable or non-programmable thermostats.
  • Product Integrated direct digital electronic controls (i-Vu® control system using BACnet® protocol).
  • Chilled water or direct expansion cooling coils.
  • Hot water or steam heating coils.
  • Total or auxiliary electric heat (fully sheathed).
  • Service switches.
  • Custom colors.
  • Permanent or throwaway filters.
  • Automatic air vent and drain on water coils.
  • Double deflection discharge grilles.
  • Tell-tale drains and stainless steel drain pans.
  • Condensate overflow switch.
  • Dual density fiberglass, foil faced fiberglass or closed cell insulation.
  • PSC, High Static PSC, or ECM motors.
  • Seismic certified construction (OSHPD & IBC).

Field-Installed Accessories

  • Remote mounted thermostats.
  • Valve packages factory wired and assembled for field mounting.
  • Drip lips for collection of condensate under valve packages.

Physical Data (Sizes 02-06)

Size 02 03 04 06
Nominal airflow cfm 200 300 400 600
Shipping weight (lb.)*
42CA 36 39 49 59
42CE 55 60 70 82
42CG 98 118 126 168
42CK 115 120 135 150
Coil water weight (approx. lb per row of coil) 0.7 0.8 1.0 1.4
Coils (fins per in.) 10 10 10 10
Coil face area (sq. ft.) 0.8 1.1 1.4 1.9
Motor (qty) 42C only 1 1 1 1
Blower (qty) 1 1 2 2
Filters nominal size (in.) (1-inch thick)
42CA N/A N/A N/A N/A
42CE† 10 x 18 10 x 22 10 x 28 10 x 33
42CG (bottom return) 10 x 23½ 10 x 28 10 x 32½ 10 x 37
42CG (rear return) 8 x 23½ 8 x 28 8 x 32½ 8 x 37
42CK (bottom return) 10 x 28 10 x 28 10 x 33 10 x 45
42CK (rear return) 7 x 21 7 x 21 7 x 27 7 x 38
Qty 1 1 1 1
Supply duct collar 1-in. 1-in. 1-in. 1-in.
Piping connections (sweat) (in.)
Coil outlet and inlet ⅝OD ⅝OD ⅝OD ⅝OD
Drain connection ⅞OD ⅞OD ⅞OD ⅞OD
Tell-tale drain ⅝OD ⅝OD ⅝OD ⅝OD

Physical Data (Sizes 08-12)

Size 08 10 12
Nominal airflow cfm 800 1000 1200
Shipping weight (lb.)*
42CA 64 95 107
42CE 95 135 157
42CG 176 215 245
42CK 155 227 241
Coil water weight (approx. lb per row of coil) 1.7 2.3 2.7
Coils (fins per in.) 10 10 10
Coil face area (sq. ft.) 2.3 3.2 3.7
Motor (qty) 42C only 1 2 2
Blower (qty) 2 4 4
Filters nominal size (in.) (1-inch thick)
42CA N/A N/A N/A
42CE† 10 x 40 10 x 54 10 x 62
42CG (bottom return) 10 x 41 10 x 54½ 10 x 63
42CG (rear return) 8 x 41 8 x 54½ 8 x 63
42CK (bottom return) 10 x 45 10 x 62 10 x 62
42CK (rear return) 7 x 38 7 x 52 7 x 52
Qty 1 1 1
Supply duct collar 1-in. 1-in. 1-in.
Piping conn. (sweat) (in.)
Coil outlet and inlet ⅝OD ⅝OD ⅝OD
Drain connection ⅞OD ⅞OD ⅞OD
Tell-tale drain ⅝OD ⅝OD ⅝OD

*Calculate operating weight of unit: shipping weight + coil water weight x number of coil rows.
†Filter size if located in return-air plenum.

SEE ALSO
WORKS WITH
CONTROLS