Skip to main content

AERO®
39M

Semi-Custom Central Station Air Handler

2,549 to 102,790 m³/h
1,500 to 60,500 Nominal cfm

39MN - Indoor
39MW - Outdoor

Carrier’s Aero 39M air handlers provide advanced technology and custom features in a streamlined, easy to install package. Units can be equipped with HEPA filters, AgION™ antimicrobial coating and other options. All marine units include a stainless steel marine double drain pan. All marine units include a stainless steel marine double drain pan. The 39M unit’s double-wall casing allows panels to be easily cleaned without damaging the insulation inside. Available fan options include forward-curved, airfoil, and plenum fans for extra quiet operation. Factory-installed controls maintain airflow and ventilation requirements while helping to prevent coil freeze-up, excessive humidity and poor indoor air quality (IAQ). Carrier’s AHUBuilder® software makes selecting and optimizing the 39M air handler easy.

Performance Features

  • All units are shrink wrapped for complete protection while in transit.
  • Double skin panel construction, excellent heat preservation.
  • Thermal break casing construction.
  • Built-in integrated control system.
  • Chilled water, hot water, direct expansion (DX), and steam coils.
  • Ultraviolet band C (UV-C) germicidal lamps.
  • Multiple filtration from pleated to HEPA filters.
  • Energy recovery ventilator (ERV) sections.
  • Multiple fan options.
  • Humidifiers for precise indoor climate conditioning.
  • Internal and external face and bypass damper sections.

Reliability Features

  • HDP high durability polyester exterior panel.
  • Stainless steel marine double drain pan provides positive drainage under pitch and roll conditions.

Maintenance Features

  • Prepainted unit exterior.
  • All service may be done through large, removable or hinged panels.
  • Marine lights and viewports for interior component inspection.

Installation Features

  • Units may be mounted in ceilings, closets, attics, etc.
  • Variable frequency drives are programmed and started up at the factory.
  • Modular construction.
  • Casing can be broken-down to individual panels and frame members.

Factory-Installed Options

  • Pre-filter
  • Medium-efficiency filter
  • HEPA filter
  • Hot water coil
  • Steam coil
  • Electrical heater
  • Various humidifiers
  • Attenuator
  • Heat recovery devices
Size Nominal airflow* (cfm) Dimensions (in)**
Height Width
03 1500 39 33
06 3000 39 46
08 4000 42 54
10 5000 42 67
12 6000 49 67
14 7000 49 72
17 8500 52 79
21 10500 62 79
25 12500 62 86
30 15000 62 104
36 18000 73 109
40 20000 79 109
50 25000 89 117
61 30500 104 117
72 36000 113 120
85 42500 113 139
96 48000 126 139
110 55000 126 157

*Airflow is based upon 500 ft/min face velocity.
**Airway length is variable upon different component arrangements. Check the product catalog for individual airway length of components.

Performance Features

  • All units are shrink wrapped for complete protection while in transit.
  • Double skin panel construction, excellent heat preservation.
  • Thermal break casing construction.
  • Built-in integrated control system.
  • Chilled water, hot water, direct expansion (DX), and steam coils.
  • Ultraviolet band C (UV-C) germicidal lamps.
  • Multiple filtration from pleated to HEPA filters.
  • Energy recovery ventilator (ERV) sections.
  • Multiple fan options.
  • Humidifiers for precise indoor climate conditioning.
  • Internal and external face and bypass damper sections.

Reliability Features

  • HDP high durability polyester exterior panel.
  • Stainless steel marine double drain pan provides positive drainage under pitch and roll conditions.

Maintenance Features

  • Prepainted unit exterior.
  • All service may be done through large, removable or hinged panels.
  • Marine lights and viewports for interior component inspection.

Installation Features

  • Units may be mounted in ceilings, closets, attics, etc.
  • Variable frequency drives are programmed and started up at the factory.
  • Modular construction.
  • Casing can be broken-down to individual panels and frame members.

Factory-Installed Options

  • Pre-filter
  • Medium-efficiency filter
  • HEPA filter
  • Hot water coil
  • Steam coil
  • Electrical heater
  • Various humidifiers
  • Attenuator
  • Heat recovery devices
Size Nominal airflow* (cfm) Dimensions (in)**
Height Width
03 1500 39 33
06 3000 39 46
08 4000 42 54
10 5000 42 67
12 6000 49 67
14 7000 49 72
17 8500 52 79
21 10500 62 79
25 12500 62 86
30 15000 62 104
36 18000 73 109
40 20000 79 109
50 25000 89 117
61 30500 104 117
72 36000 113 120
85 42500 113 139
96 48000 126 139
110 55000 126 157

*Airflow is based upon 500 ft/min face velocity.
**Airway length is variable upon different component arrangements. Check the product catalog for individual airway length of components.

SEE ALSO
WORKS WITH
CONTROLS