Skip to main content

AquaSnap® - High temperature monobloc air-to-water heat pump with integrated hydraulic module
61AF 014-019

Refrigerant : R-407C

Compressor : scroll fixed-speed

Nominal heating capacity : 14-19 kW

The Aquasnap high-temperature heat pump range was designed for commercial applications such as the heating of offices, apartments and hotels as well as domestic hot water production in new and refurbished buildings.

  • Hot water up to 65°C
  • High energy efficiency level
  • Hydronic module with Class A circulator
  • Superior reliability

General description

  • Small footprint and low height allowing it to blend in with any architectural styles
  • Energy savings: certified Eurovent energy efficiency class A
  • Operating range allows outside temperatures down to -20°C and leaving water temperatures up to 65°C for domestic hot water applications
  • Intelligent unit control permits unit operation in extreme conditions, minimizing unit shut-down times

Quiet operation

  • Low-noise scroll compressors with low vibration level
  • The compressor assembly is installed on an independent chassis and supported by anti-vibration mountings
  • Dynamic suction and discharge piping supports, minimizing vibration transmission (Carrier patent)
  • Vertical evaporator coils
  • Protection grilles on anti-vibration mountings to protect the heat exchanger against possible shocks
  • Latest-generation low-noise Flying Bird™ fans, made of a composite material, are now even quieter and do not generate intrusive low-frequency noise
  • Rigid fan installation for reduced start-up noise

Easy and fast installation

  • Integrated hydronic module (option)
    • Variable speed water pump
    • Water filter protects the water pump against circulating debris
    • Over-pressure valve
    • Thermal insulation and frost protection down to -20°C, using an electrical resistance heater
  • Easily removable panels
  • Simplified electrical connections
  • Fast commissioning

Economical operation

  • Seasonal heating performance optimized
    • Energy label A+
    • Electronic expansion valve
    • Dynamic superheat management
    • Specific FreeDefrost algorithm
  • Reduced maintenance costs
    • Maintenance-free scroll compressors with vapour injection
    • Pro-Dialog+ control offers fast diagnosis

Environmental care

  • Non-ozone depleting R-407C refrigerant
  • Leak-tight refrigerant circuit

Superior reliability

  • State-of-the-art concept
  • Auto-adaptive control
  • Exceptional endurance test

Pro-Dialog+ control

  • Energy management
    • Seven day internal time schedule clock
    • Set-point reset based on the outside air temperature or the return water temperature or on the water heat exchanger delta T
    • Master/slave control of two heat pumps operating in parallel
    • Start/stop based on the outside air temperature
  • Ease-of-use
  • New backlighted LCD interface includes a manual control potentiometer to ensure legibility under any lighting conditions
  • Information displayed clearly in English, French, German, Italian and Spanish
  • Pro-Dialog+ navigation uses intuitive tree-structure menus, similar to the Internet browsers. They are user-friendly and permit quick access to the principal operating parameters
carrier-Pro-Dialog-plus-control

Remote operating mode with volt-free contacts (standard)

  • Start/stop
  • Dual set-point
  • Demand limit
  • Alert indication
  • Alarm indication
  • User safety
  • Water pump control

Remote interface (accessory)

Options

  • Coils Corrosion protection
  • Low noise level
  • Very low noise level
  • Unit with ductable fans
  • Grilles and enclosure panels
  • LP VSD single-pump
  • frost protection
  • Lon, J-Bus or BacNetgateway
  • Master/slave operation
  • Soft Starter
  • Compliance with Russian regulations
  • Welded exchangers connection kit

Accessories

  • External water filter on the hydraulic module

General description

  • Small footprint and low height allowing it to blend in with any architectural styles
  • Energy savings: certified Eurovent energy efficiency class A
  • Operating range allows outside temperatures down to -20°C and leaving water temperatures up to 65°C for domestic hot water applications
  • Intelligent unit control permits unit operation in extreme conditions, minimizing unit shut-down times

Quiet operation

  • Low-noise scroll compressors with low vibration level
  • The compressor assembly is installed on an independent chassis and supported by anti-vibration mountings
  • Dynamic suction and discharge piping supports, minimizing vibration transmission (Carrier patent)
  • Vertical evaporator coils
  • Protection grilles on anti-vibration mountings to protect the heat exchanger against possible shocks
  • Latest-generation low-noise Flying Bird™ fans, made of a composite material, are now even quieter and do not generate intrusive low-frequency noise
  • Rigid fan installation for reduced start-up noise

Easy and fast installation

  • Integrated hydronic module (option)
    • Variable speed water pump
    • Water filter protects the water pump against circulating debris
    • Over-pressure valve
    • Thermal insulation and frost protection down to -20°C, using an electrical resistance heater
  • Easily removable panels
  • Simplified electrical connections
  • Fast commissioning

Economical operation

  • Seasonal heating performance optimized
    • Energy label A+
    • Electronic expansion valve
    • Dynamic superheat management
    • Specific FreeDefrost algorithm
  • Reduced maintenance costs
    • Maintenance-free scroll compressors with vapour injection
    • Pro-Dialog+ control offers fast diagnosis

Environmental care

  • Non-ozone depleting R-407C refrigerant
  • Leak-tight refrigerant circuit

Superior reliability

  • State-of-the-art concept
  • Auto-adaptive control
  • Exceptional endurance test

Pro-Dialog+ control

  • Energy management
    • Seven day internal time schedule clock
    • Set-point reset based on the outside air temperature or the return water temperature or on the water heat exchanger delta T
    • Master/slave control of two heat pumps operating in parallel
    • Start/stop based on the outside air temperature
  • Ease-of-use
  • New backlighted LCD interface includes a manual control potentiometer to ensure legibility under any lighting conditions
  • Information displayed clearly in English, French, German, Italian and Spanish
  • Pro-Dialog+ navigation uses intuitive tree-structure menus, similar to the Internet browsers. They are user-friendly and permit quick access to the principal operating parameters
carrier-Pro-Dialog-plus-control

Remote operating mode with volt-free contacts (standard)

  • Start/stop
  • Dual set-point
  • Demand limit
  • Alert indication
  • Alarm indication
  • User safety
  • Water pump control

Remote interface (accessory)

Options

  • Coils Corrosion protection
  • Low noise level
  • Very low noise level
  • Unit with ductable fans
  • Grilles and enclosure panels
  • LP VSD single-pump
  • frost protection
  • Lon, J-Bus or BacNetgateway
  • Master/slave operation
  • Soft Starter
  • Compliance with Russian regulations
  • Welded exchangers connection kit

Accessories

  • External water filter on the hydraulic module
Documents