AquaSnap® - Ductable air-cooled liquid chiller
30RBSY
Refrigerant : R-410A
Compressor : scroll fixed-speed
Nominal cooling capacity : 40-160kW
The Aquasnap liquid chiller range was designed for commercial (air conditioning of offices, hotels, etc.) or industrial (low-temperature process units etc.) applications.
- Compact design
- High static available pressure
- Quiet operation
- Variable speed fans
- Variable water flow (optional)
Quiet operation
- Low-noise scroll compressors installed on an independent chassis and supported by anti-vibration mountings
- Low noise fans made of a composite material
- Vertical condenser coils
- Fan motor controlled by a variable-frequency controller, to allow adjustment of the fan speed in accordance with the ducting for optimised efficiency
Easy and fast installation
- Flying bird IV fans controlled by a variable-frequency controller to provide up to 240 Pa available pressure (depending on the size) at nominal flow rate
- Flow control in accordance with the ducting for optimized efficiency with the possibility to program a maximum supply air flow
- Small unit footprint with a low height for easy installation in most buildings
- Integrated hydraulic module
- Simplified electrical connections
- Fast commissioning
Economical operation
- Variable-speed pump (option)
- Variable-speed fan
- Increased energy efficiency at part load
- Reduced maintenance costs
Environmental care
- Non-ozone depleting R-410A refrigerant
- Leak-tight refrigerant circuit
Superior reliability
- State-of-the-art concept
- Auto-adaptive control
- Exceptional endurance tests
Novation® Aluminum micro-channel heat exchangers
- Novation® microchannel coils technology
- Extra-resistant aluminum alloy
- Corrosion resistance
- Can be used in moderate marine and urban environments
- Approximately 10% more efficient than a traditional coil
- 40% reduction in the amount of refrigerant used in the chiller
- Reduces air pressure losses by 50%
- Can be cleaned very quickly
Touch Pilot Junior control
- Energy management
- Internal time schedule clock
- Set-point offset based on the outside air temperature
- Master/slave control of two heat pumps operating in parallel
- Integrated advanced communication features
- Night mode
- Easy and high-speed communication technology over Ethernet (IP) to a building management system
- Access to multiple unit parameters
- User-friendly and intuitive 4.3" color touch screen user interface

Remote management as standard
- Easily accessed from the internet
- Multiple remote control, monitoring and diagnostic possibilities
- Optional communication gateways
- Start/Stop of the machine
- Dual set-point management
- Water pump control
- Coils Corrosion protection
- Medium or low temperature brine solution
- Partial heat recovery
- Very low noise level
- Grilles and enclosure panels
- Suction filter
- Hydraulic module with choice of pump
- Expansion tank
- Frost protection
- Lon, J-Bus or BacNet gateway
- Master/slave operation
- Free Cooling dry cooler management
- Main disconnect switch without fuse
- Soft Starter
- Reinforced EMC filtration
- Welded exchangers connection kit
Quiet operation
- Low-noise scroll compressors installed on an independent chassis and supported by anti-vibration mountings
- Low noise fans made of a composite material
- Vertical condenser coils
- Fan motor controlled by a variable-frequency controller, to allow adjustment of the fan speed in accordance with the ducting for optimised efficiency
Easy and fast installation
- Flying bird IV fans controlled by a variable-frequency controller to provide up to 240 Pa available pressure (depending on the size) at nominal flow rate
- Flow control in accordance with the ducting for optimized efficiency with the possibility to program a maximum supply air flow
- Small unit footprint with a low height for easy installation in most buildings
- Integrated hydraulic module
- Simplified electrical connections
- Fast commissioning
Economical operation
- Variable-speed pump (option)
- Variable-speed fan
- Increased energy efficiency at part load
- Reduced maintenance costs
Environmental care
- Non-ozone depleting R-410A refrigerant
- Leak-tight refrigerant circuit
Superior reliability
- State-of-the-art concept
- Auto-adaptive control
- Exceptional endurance tests
Novation® Aluminum micro-channel heat exchangers
- Novation® microchannel coils technology
- Extra-resistant aluminum alloy
- Corrosion resistance
- Can be used in moderate marine and urban environments
- Approximately 10% more efficient than a traditional coil
- 40% reduction in the amount of refrigerant used in the chiller
- Reduces air pressure losses by 50%
- Can be cleaned very quickly
Touch Pilot Junior control
- Energy management
- Internal time schedule clock
- Set-point offset based on the outside air temperature
- Master/slave control of two heat pumps operating in parallel
- Integrated advanced communication features
- Night mode
- Easy and high-speed communication technology over Ethernet (IP) to a building management system
- Access to multiple unit parameters
- User-friendly and intuitive 4.3" color touch screen user interface

Remote management as standard
- Easily accessed from the internet
- Multiple remote control, monitoring and diagnostic possibilities
- Optional communication gateways
- Start/Stop of the machine
- Dual set-point management
- Water pump control
- Coils Corrosion protection
- Medium or low temperature brine solution
- Partial heat recovery
- Very low noise level
- Grilles and enclosure panels
- Suction filter
- Hydraulic module with choice of pump
- Expansion tank
- Frost protection
- Lon, J-Bus or BacNet gateway
- Master/slave operation
- Free Cooling dry cooler management
- Main disconnect switch without fuse
- Soft Starter
- Reinforced EMC filtration
- Welded exchangers connection kit
Documents