Skip to main content

42C/D/S/V

Fan Coil Unit
Horizontal or vertical Chilled Water application
Furred-in & cabinet type-Ceiling & floor Mounted

150 - 2000 nominal cfm

Carrier’s 42C,D,S,V Series fan coil units offer:

  • Design flexibility, occupying minimum space
  • Easy, low-cost installation
  • Permanent split capacitor or electronically commutated motors deliver peak operating efficiency
  • High performance, low cost
  • Greater zone comfort control

Carrier’s extensive range of superior fan-coil units combine design flexibility with easy, low-cost installation.

Versatility With Carrier’s 42 Series fan coils, you can select from 4 horizontal, 6 vertical, 5 ducted or 5 stacked models; furred in or cabinet style, slant top or low silhouette, in 150 through 2000 cfm capacities. Coils are available with up to 5 rows (depending on model), to satisfy a variety of application requirements.

Casings and frame are fabricated from tough, heavy gage galvanized steel. Custom decorative colors allow the unit to blend with any interior design.

The units are ideal for installation in motels, apartments, and other multiroom buildings.


Low-cost installation and operation

Each unit is designed to occupy a minimum space. No complex system controls are required for Carrier fan coil units. Piping, drain, and wiring connections are readily accessible and mounting holes and slots are predrilled to save installation time and field labor expense.


42 Series quality reduces service and maintenance expenses


All coils are factory leak tested at 300 psig air pressure with coil submerged in water. Condensate drain pans are available in stainless steel or heavy gage galvanized steel constructions.

A variety of insulation types are available for energy savings, sound absorption and indoor air quality (IAQ) preservation.


Efficient operation


Blower wheels are centrifugal-type, forward curved, double width, and double inlet sized for maximum efficiency


Quiet, dependable performance

All units are built to operate unobtrusively with quiet motors and fans. In addition, 1/2-in. thick sound-absorbing, insulation is used to line the cabinet


42C Series horizontal ducted & exposed units (200-1200 cfm)
42V Series vertical units (200-1200 cfm)
42D Series horizontal/vertical ducted & exposed units (600-2000 cfm)
42S Vertical stacked units (300-2000 cfm)

42C

  • 42C Series horizontal ducted & exposed units (200-1200 cfm)-(42CA/CE/CG/CK)
  • 42C Units shall be tested and certified in accordance with AHRI standard 440
  • Insulation and adhesive shall meet NFPA90A
  • All base or standard units shall have C-ETL-US listing signifying the units have been examined by ETL and are in compliance with both the US and Canadian applicable standards.
  • All equipment wiring shall comply with NEC
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Factory-assembled, horizontal, blow-thru type fan coil for furred-in, exposed ceiling or ducted installations.
  • Standard insulation shall be dual density fiberglass insulation
  • Units shall be supplied with a 1-in. fiberglass throwaway filter

42D

  • 42D Series horizontal/vertical ducted & exposed units (600-2000 cfm)-(42DA/DC/DD/DE/DF)
  • 42D Units shall be ETL approved. All units shall be CSA (Canadian Standards Association) approved
  • All equipment wiring shall comply with NEC
  • The 42DF model shall be tested and certified in accordance with AHRI 440.
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Insulation and adhesive shall meet NFPA90A
  • Factory assembled, horizontal or vertical blow-thru ducted fan coil unit.
  • Standard insulation shall be dual density fiberglass insulation
  • Units shall be supplied with a 1-in. fiberglass throwaway filter

42V

  • 42V Series vertical units (150-1200 cfm)-(42VAC/VBC/VCA/VEA/VFC/VGA)
  • 42V Units shall be tested and certified in accordance with AHRI standard 440
  • All base or standard units shall have C-ETL-US listing signifying the units have been examined by ETL and are in compliance with both the US and Canadian applicable standards.
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Insulation and adhesive shall meet NFPA90A
  • Factory-assembled, vertical, blow-thru type floor mounted fan coil for furred-in or exposed installations.
  • Standard insulation shall be dual density fiberglass insulation
  • Units shall be supplied with a 1-in. fiberglass throwaway filter

42S

  • 42S Vertical stacked units (300-2000 cfm)-(42SG/SH/SJ/SM/SU)
  • 42S Units shall be tested and certified in accordance with AHRI standard 440
  • All base or standard units shall have C-ETL-US listing signifying the units have been examined by ETL and are in compliance with both the US and Canadian applicable standards.
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Insulation and adhesive shall meet NFPA90A
  • Factory assembled, stack fan coil units
  • Standard insulation shall be dual density fiberglass insulation
  • A filter track complete with 1-in. non-woven synthetic throwaway filter shall be installed in the unit. Optional filters are available.

42C

  • 42C Series horizontal ducted & exposed units (200-1200 cfm)-(42CA/CE/CG/CK)
  • 42C Units shall be tested and certified in accordance with AHRI standard 440
  • Insulation and adhesive shall meet NFPA90A
  • All base or standard units shall have C-ETL-US listing signifying the units have been examined by ETL and are in compliance with both the US and Canadian applicable standards.
  • All equipment wiring shall comply with NEC
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Factory-assembled, horizontal, blow-thru type fan coil for furred-in, exposed ceiling or ducted installations.
  • Standard insulation shall be dual density fiberglass insulation
  • Units shall be supplied with a 1-in. fiberglass throwaway filter

42D

  • 42D Series horizontal/vertical ducted & exposed units (600-2000 cfm)-(42DA/DC/DD/DE/DF)
  • 42D Units shall be ETL approved. All units shall be CSA (Canadian Standards Association) approved
  • All equipment wiring shall comply with NEC
  • The 42DF model shall be tested and certified in accordance with AHRI 440.
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Insulation and adhesive shall meet NFPA90A
  • Factory assembled, horizontal or vertical blow-thru ducted fan coil unit.
  • Standard insulation shall be dual density fiberglass insulation
  • Units shall be supplied with a 1-in. fiberglass throwaway filter

42V

  • 42V Series vertical units (150-1200 cfm)-(42VAC/VBC/VCA/VEA/VFC/VGA)
  • 42V Units shall be tested and certified in accordance with AHRI standard 440
  • All base or standard units shall have C-ETL-US listing signifying the units have been examined by ETL and are in compliance with both the US and Canadian applicable standards.
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Insulation and adhesive shall meet NFPA90A
  • Factory-assembled, vertical, blow-thru type floor mounted fan coil for furred-in or exposed installations.
  • Standard insulation shall be dual density fiberglass insulation
  • Units shall be supplied with a 1-in. fiberglass throwaway filter

42S

  • 42S Vertical stacked units (300-2000 cfm)-(42SG/SH/SJ/SM/SU)
  • 42S Units shall be tested and certified in accordance with AHRI standard 440
  • All base or standard units shall have C-ETL-US listing signifying the units have been examined by ETL and are in compliance with both the US and Canadian applicable standards.
  • Each coil shall be factory tested for leakage at 300 psig air pressure with coil submerged in water.
  • Insulation and adhesive shall meet NFPA90A
  • Factory assembled, stack fan coil units
  • Standard insulation shall be dual density fiberglass insulation
  • A filter track complete with 1-in. non-woven synthetic throwaway filter shall be installed in the unit. Optional filters are available.