Skip to main content

CCE ES SNAP ADV at-a-glance

The ES Snap Advanced Custom Programming course is the third in the Controls Expert Training Series. After successfully completing this course, you will be able to use Carrier's Snap tool to quickly and efficiently create basic control programs, symbol libraries, commission a control program, use Snap productivity tools, demonstrate ZS Sensor logic, translate PID Loop Control and create an advanced control program with a custom sequence of operation.


duration cost format register*
2 days $350 classroom 8/13/2019†

*To obtain a registration link for this class, please contact your local Carrier Sales Office Controls Representative.

† Class registration will close 7/15/2019.

Automated Logic Corporation has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 12100 Sunset Hills Rd., Suite 130, Reston, VA 20190; (703) 234-4065. BAS University is the continuing education organization of Automated Logic Corporation.

IACET

Class Overview

The ES Snap Advanced Custom Programming course is the third in the Controls Expert Training Series. After successfully completing this course, you will be able to use Carrier's Snap tool to quickly and efficiently create basic control programs, symbol libraries, commission a control program, use Snap productivity tools, demonstrate ZS Sensor logic, translate PID Loop Control and create an advanced control program with a custom sequence of operation.

For more information on the Carrier Controls Expert Program, please contact your local Carrier Controls representative or visit www.carrier.com/controls-experts.

Who Should Attend this training

Carrier field technicians and engineers who are looking to better utilize their skills with Snap.

HVAC Training Objectives

Learning Objectives

After successfully completing this course, you will be able to use Carrier’s Snap tool to quickly and efficiently

  • Create basic control programs
  • Use programming and naming standards
  • Create a symbol library
  • Commission a control program
  • Use Snap productivity tools
  • Demonstrate ZS Sensor logic
  • Translate PID Loop Control
  • Make major edits to an existing control program
  • Create an advanced control program with a custom sequence of operation

Learning Methods Used

This course is instructor-led in a classroom setting with extensive hands-on tasks to present the material. Student’s achievement of the learning objectives is determined by successful completion of the course, and final written exam.

Class Details

Topics Covered

All times are approximate and shown as (classroom hours/lab or workshop hours).

Snap Fundamentals
  • Verify option settings 
  • Save a control program 
  • Place the microblocks 
  • Connect microblocks with wires 
  • Edit microblock properties 
  • Simulate the control program
Real World Programming - Part I
  • Create a logic symbol
  • Create a control program using EquipmentBuilder
  • Decipher a control program
  • Modify a control program
SNAP tools (1.0/1.0)
  • Info
  • Find
  • Edit Common Properties
  • Palette
EZS Sensors
Define PID Control
Real World Programming - Part II
  • Final project

Class Requirements

MATERIALS TO BRING

You will need to bring with you a laptop and mouse with these requirements:

Hardware
  • 2 GHz processor
  • 1.5 GB RAM (4GB or more of RAM preferred)
  • 2 GB Disk Space
  • 1 USB Port
  • 1 Ethernet port (Wired Network Interface Card (NIC))
Software

Operating systems must have Administrative Rights on the following software:

  • Windows 10 Pro (32 or 64-bit)
  • Windows 8 Enterprise or Professional (32 or 64 bit) OR Windows 7 Pro or Ultimate (32 or 64 bit)
  • Need Adobe Reader preinstalled before class -- free download here