Precision cabinet
50CO
Cooling capacity : 40-130 kW
Air flow : 10 000-27 000 m³/h
Close control unit specifically adapted to meet the needs of rooms with a high heat load or sensitive locations (data centers, computer rooms, autocom rooms, etc.).- Wide range of single unit water chillers
- Compact and attractive design
- EC motor saves energy
- Auto-adaptive control
- Easy installation
- 5 sizes available
- Rated air flow range: 10 000 to 27 000 m3/h
Casing
- Dual wall construction
- RAL 7035 and 7024 grey pre-coated removable panel
Filtration
- G4 or G7 filter cells
- Filter cells kept compressed to ensure a completely leaktight seal
- Filter fouling value monitored by analogue sensor and displayed by the controller
Cooling coil cross-section
- Copper tubes, aluminum fins
- Stainless or aluminum condensate drain pan
- 2- or 3-way control valve fitted and connected
Ventilation section
- Centrifugal plug fan, associated with an electronically commutated (EC) motor
- EC motor: fan adaptation via manual adjustment or "self-regulating" adjustment by the controller
Electrical box
- Main disconnect switch
- Regulated by Carrier CCU controller
- Return air dry-bulb temperature control
- Return humidity control
- Water leak detection
- Remote control and fault summary contact
Carrier CCU controller
- 160-character display showing the operating instructions, operating states, faults and solutions
- Configurable controller
- Two fault levels
- Monitoring of operating times
- Electric heater
- Hot water coil
- Humidifier
- Free cooling box
- Support base for supply air via raised floor
- Cased sub-base with grille or damper
- Supply plenum
- Motorized damper on intake section
- Fire thermostat
- Supply air low limit sensor
- LON gateway
- Changeover thermostat
- 5 sizes available
- Rated air flow range: 10 000 to 27 000 m3/h
Casing
- Dual wall construction
- RAL 7035 and 7024 grey pre-coated removable panel
Filtration
- G4 or G7 filter cells
- Filter cells kept compressed to ensure a completely leaktight seal
- Filter fouling value monitored by analogue sensor and displayed by the controller
Cooling coil cross-section
- Copper tubes, aluminum fins
- Stainless or aluminum condensate drain pan
- 2- or 3-way control valve fitted and connected
Ventilation section
- Centrifugal plug fan, associated with an electronically commutated (EC) motor
- EC motor: fan adaptation via manual adjustment or "self-regulating" adjustment by the controller
Electrical box
- Main disconnect switch
- Regulated by Carrier CCU controller
- Return air dry-bulb temperature control
- Return humidity control
- Water leak detection
- Remote control and fault summary contact
Carrier CCU controller
- 160-character display showing the operating instructions, operating states, faults and solutions
- Configurable controller
- Two fault levels
- Monitoring of operating times
- Electric heater
- Hot water coil
- Humidifier
- Free cooling box
- Support base for supply air via raised floor
- Cased sub-base with grille or damper
- Supply plenum
- Motorized damper on intake section
- Fire thermostat
- Supply air low limit sensor
- LON gateway
- Changeover thermostat